NGP SCORCHER gas preHeater with HCT

The new NGP SCORCHER Gas PreHeater has been designed to be connected between the outlet of a cylinder and the inlet of a regulator (or other locations). The powerful 250 Watt heating element heats the gas as it flows through the body of the heater. Using Heater Capsule Technology (HCT), the preHeater is now ⅓ smaller but even more efficient at heating the gas. The compact design minimises the distance the combination of preHeater and regulator extends out from the cylinder as well.

The temperature of the heater is thermostatically controlled to around 75°C. Now including as standard, a new water & dust resistant case (IP66).

Models available for direct connection to inlets of various type of manifolds. In this situation, the preHeater is designed for inserting between the high pressure hose and the manifold. 

Features Include:

• Australian designed & manufactured
• Built tough. Proven 40 year old original design
• NEW! Compact HCT design - now ⅓ of the original size!
• IP66 rated
• Pressure rated to 240 Bar
• Capable of gas flows up to 200 lpm*
• NEW! Upgraded 250 Watt element – more grunt & reliability
• Thermostat controlled to approximately 75°C
• Models for CO₂ and other gases
• 240 volt & 110 volt models (including electrical plug)
• 1.7 metre connection lead
• HCT and thermostat are replaceable spare parts

* Due to the nature of carbon dioxide, gas flows can vary depending on climatic conditions & equipment used  

Can be set up for use with other gases (Not suitable for fuel gases. Not tested for Oxygen)